发布时间：2023-10-19 13:28:11
〖产品描述Description〗
这种（18+1）×1多模光纤组合器是为高功率光纤激光器应用而设计的。它组合了18个泵浦激光器和一个信号通道到一个双包层输出光纤中。光纤类型可定制。
This (18+1)×1 multi-mode fiber combiner is designed for high power fiber laser application. It combines 18pcs pump lasers and one signal channel into one double cladding output fiber. Fiber type can be customized.
〖主要特点Key Features〗
高信号传输效率
High Signal Transfer Efficiency
高泵效率
High Pump Efficiency
波长不敏感
Wavelength Insensitive
提供自定义配置
Custom Configurations Available
〖机械尺寸Mechanical Dimension〗 Unit: mm
C7: 100x15x10
〖性能参数Performance Parameter〗
参数/试验条件 Parameters/Test conditions | 最小值 Min. | 典型值 Typ. | 值 Max. | 单位 Unit | 备注 Note | ||
1 | 信号工作波长 Signal Operating Wavelength | 1000 | 1064 | 1100 | nm | ||
2 | 泵浦工作波长 Pump Operating Wavelength | 800 | 1000 | nm | |||
3 |
泵浦光纤 Pump Fiber | 纤芯直径 Core Diameter | 105 | ?m | Refer to fiber codes 参考光纤编码 | ||
4 | 包层直径 Cladding Diameter | 125 | ?m | ||||
5 | 数值孔径 Numerical Aperture | 0.22 | - | ||||
6 | 信号光纤 Signal Fiber | HI1060 or 6/125 DCF | Refer to fiber codes 参考光纤编码 | ||||
7 | 输出光纤 Output Fiber | 20/400 DCF | Refer to fiber codes 参考光纤编码 | ||||
8 | 泵浦效率 Pump Efficiency | 93 | 95 | % | |||
9 | 信号端插入损耗 Signal Insertion Loss | 0.5 | 0.7 | dB | |||
10 | ㎡ | 1.3 | - | ||||
11 | 光隔离 Optical Isolation | 20 | dB | ||||
12 | 尾纤长度 Fiber Length | 0.8 | m | Each port 每个端口 | |||
13 | 承受功率 Power Handling | 30 | W | Each port 每个端口 | |||
14 | 工作环境温度 Operating Environment Temperature | -5 | +70 | ℃ | |||
15 | 工作湿度 Operating Humidity | 5 | 95 | %RH | Not recommend in high humidity for long time. 不建议长时间在高湿度环境中使用。 | ||
16 | 储存温度 Storage Temperature | -40 | +85 | ℃ | |||
17 | 封装 Package | C7 | - |
〖订购信息Ordering information〗
MPC-（18+1）×1-F泵浦波长/泵浦功率信号波长泵浦光纤/信号光纤输出光纤封装光纤长度
注：F： 前进泵。
泵浦/信号/输出光纤：请参阅光纤编码。
包装：C7
MPC-(18+1)×1-F-Pump wavelength/Pump power-Signal wavelength-Pump fiber/Signal fiber-Output fiber-Package-Fiber length
Note :
F: Forward pump.
Pump/Signal/Output fiber: refer to fiber codes.
Package: C7
