| 产品特性：光功率稳定 | 加工定制：否 | 品牌：梓冠 |
| 型号：ZG | 种类：光开关 | 波段范围：1260-1650nm |
| 运转方式：连续式 | 激励方式：电激励式 | 工作物质：半导体 |
| 光路径：透过型外光路 | 输出形式：功率型 | 传输信号：单电源型 |
| 速度：高速 | 通道：多通道 | 输出波长：1260-1650 1064 850nm |
2x2机械光开关是一种经过行业验证的光纤交换机，具有优异的耐用性和可靠性。它允许在输入光纤和输出光纤之间进行信道选择。它被广泛应用于光网络领域，如OLP和交换模块。
2x2 Mechanical Switch is an industry proven fiber optic switch with excellent durability and reliability. It allows channel selection between input fibers and output fibers. It is widely used in optical network fields such as OLP and switch module.
〖特性Features〗
低插入损耗
Low Insert Loss
高重复性和稳定性
High Repeatability and Stability
锁定和非锁定
Latching and Non-latching
〖应用Applications〗
OADM光纤监控
OADM Fiber Monitoring
光网络保护
Optical Network Protection
测量设备
Measurement Equipment
〖性能参数Performance Parameter〗
参数 Parameters | 单位 Unit | 规格 Specification |
波长 Wavelength | nm | 1310±50 |
插入损耗（值） Insertion Loss(Max) | dB | ≤0.8 |
回波损耗 Return Loss | dB | ≥50 |
可重复性 Repeatability | dB | ≤ 0.02 |
串扰 Crosstalk | dB | ≥50 |
偏振相关损耗 PDL | dB | ≤ 0.05 |
温度相关损耗 TDL | dB | ≤ 0.25 |
工作温度 Operation Temperature | ℃ | -20~70 |
储存温度 Storage Temperature | ℃ | -40~85 |
切换时间 Switch Time | ms | ≤5 |
使用寿命 Durability | Cycle | ≥107 |
光功率 Optical Power | mw | ≤500 |
控制电压 Control Voltage | V | 3 or 5 |
光纤类型 Fiber Type | 单模，G657 Singlemode, G657 | |
尾纤长度 Fiber Length | 1±0.05 M | |
连接器类型 Connector Type | LC/APC | |
注意: 1.损耗基于23℃、中心波长±50nm的测试结果。多频带增加0.2dB。 2.重复性是在100次循环后定义的. 3.不包括连接器，连接器的插入损耗增加0.2dB. Notes: 1.The loss is based on the test results at 23℃ at the central wavelength ±50nm. Multiband adds 0.2dB. 2.Repeatability is defined after 100 cycles. 3.Excluding connector, the insertion loss of connector is increased by 0.2dB. |
〖尺寸图Mechanical Dimension〗
〖引脚定义Pin Definition〗
Type | Status | Optical Path | Electric Drive | Status Sensor | ||||||
D1x2 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 | ||
Latching | A | C1→O1, C2→O2 | -- | -- | GND | V+ | Close | Open | Open | Close |
B | C1→O3, C2→O4 | V+ | GND | -- | -- | Open | Close | Close | Open | |
Non-Latching | A | C1→O1, C2→O2 | -- | -- | -- | -- | Close | Open | Open | Close |
B | C1→O3, C2→O4 | V+ | -- | -- | GND | Open | Close | Close | Open |
〖电流和电阻参数Parameters for current and resistance〗
Specification | Voltage | Current | Resistance | |
5V | Latching | 4.5~5.5V | 36~44mA | 125? |
5V | Non-Latching | 4.5~5.5V | 26~32mA | 175? |
3V | Latching | 2.7~3.3V | 54~66mA | 50? |
3V | Non-Latching | 2.7~3.3V | 39~47mA | 70? |
〖订货信息Order InformationMOS-A-B-C-D-E-F-G-H (MOS: Mechanical Optical Switch )〗
A | B | C | D | E | F | G | H |
Port type | Fiber | Control Voltage | Test | Switch Type | Tube | Fiber Length | Connector |
1×1 1×2 2×2B 2x2F D1×2 D2×2B | G657A1 G657A2 OM1 62.5/125 OM2 50/125 | 3:3V 5:5V | 850:850nm 1310:1310nm 1550:1550nm 1315:1310&1550nm | L：Latching N:Non-Latchig
| 25:250um 90:900um Others | 05:0.5m±5cm 10:1.0m±5cm 15:1.5m±5cm Others | OO: None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC X: Others |
注意事项：
1.以上规格仅显示模块的典型性能。
2.请联系我们的销售人员讨论您的具体要求。
Notes:
1. Above specifications just show the typical performance of Module.
2. Please contact our sales to discuss your specific requirements.
